2020 Suzuki DF150A 150HP Outboard Motor is a used white-finish four-stroke marine engine with approximately 300 hours, a 25-inch shaft, and all rigging included according to the seller. The seller states that the engine has recently completed its 300-hour service and currently has no known issues.
Powered by Suzuki’s 2.867-liter inline-four-cylinder engine, the DF150A is designed to provide responsive acceleration, dependable power, and practical fuel efficiency for compatible fishing boats, center consoles, bay boats, and recreational vessels.
The Suzuki DF150A features double overhead camshafts, 16 valves, and multi-point sequential electronic fuel injection. This combination is engineered to support controlled fuel delivery and responsive operation across the engine’s operating range. Suzuki also incorporates an offset driveshaft and two-stage gear reduction into this engine platform to support efficient power transfer and reduce vibration.
This model features a 25-inch X shaft and a white finish. The shaft configuration is intended for compatible boats designed for that transom height. Verify your vessel’s transom requirements, engine mounting position, and maximum horsepower rating before purchasing.
A key advantage of this listing is that all rigging is advertised as included. This may simplify the repowering process for a compatible vessel. However, buyers should request an itemized list confirming exactly which controls, wiring harness, cables, steering components, gauges, propeller, and mounting hardware are supplied.
The seller reports that the engine has completed its 300-hour service and has zero known issues. Before purchase, request the service invoice, maintenance history, available diagnostic information, and confirmation of the engine’s serial number and operating hours.
Whether you’re replacing an existing outboard or preparing a compatible boat for its next season, the 2020 Suzuki DF150A provides 150HP four-stroke power with an advertised complete-rigging package.
Product Specifications
Brand: Suzuki Marine
Model Family: DF150A
Model Year: 2020
Horsepower: 150 HP
Engine Type: Four-Stroke
Engine Configuration: Inline 4-Cylinder
Displacement: 2,867cc / 2.867L
Valvetrain: DOHC, 16 Valves
Fuel System: Multi-Point Sequential Electronic Fuel Injection
Bore x Stroke: 97 x 97 mm
Full-Throttle Operating Range: 5,000–6,000 RPM
Shaft Length: 25 inches / X shaft
Approximate Dry Weight: 522 lbs / 237 kg for the mechanical-control X-shaft configuration; verify exact variant
Alternator Output: 12V, 44A
Starting System: Electric Start
Trim System: Power Trim and Tilt
Gear Ratio: 2.50:1
Color: White
Engine Hours: Approximately 300 hours
Recent Maintenance: 300-hour service completed, according to seller
Rigging: All rigging included, according to seller
Condition: Used
Reported Mechanical Condition: Seller reports no known issues
Specifications are based on the Suzuki DF150A model family. Actual specifications may vary by model suffix and control configuration. Confirm the exact identification plate before purchase.
Key Features
2020 Suzuki DF150A 150HP outboard motor, white finish, 25-inch X shaft, approximately 300 engine hours, used outboard, 300-hour service completed according to seller, 2.867L inline-four four-stroke engine, DOHC 16-valve configuration, electronic fuel injection, 44-amp charging system, electric start, power trim and tilt, all rigging included according to seller, suitable for compatible fishing boats and recreational vessels.
Why Choose the 2020 Suzuki DF150A 150HP Outboard Motor?
The 2020 Suzuki DF150A 150HP Outboard Motor is designed for boat owners who want substantial four-stroke power, responsive acceleration, and practical operating efficiency.
Its 2.867-liter inline-four engine provides 150 horsepower and uses electronic fuel injection to control fuel delivery. Suzuki’s DOHC 16-valve design is engineered to support consistent engine performance across the operating range.
The advertised 25-inch shaft makes this engine a potential option for boats designed for an X-shaft outboard. Its white finish provides a clean appearance that complements many recreational boats and fishing vessels.
The seller also advertises all rigging as included, which may help simplify a repowering project. The exact components should be itemized before purchase to ensure compatibility with your boat.
2.867-Liter Four-Cylinder Four-Stroke Engine
The Suzuki DF150A uses a 2.867-liter inline-four-cylinder four-stroke engine with double overhead camshafts and 16 valves.
This large-displacement configuration is designed to provide responsive acceleration and dependable power for compatible marine applications. Suzuki specifies a full-throttle operating range of 5,000–6,000 RPM.
Correct propeller selection, mounting height, routine servicing, and operating practices are important for achieving suitable engine performance.
Multi-Point Sequential Electronic Fuel Injection
The DF150A uses multi-point sequential electronic fuel injection to control fuel delivery according to engine operating requirements.
This system is designed to support responsive throttle performance and practical fuel management. Actual fuel consumption depends on the boat’s hull, loading, propeller selection, engine installation, operating speed, and water conditions.
25-Inch X Shaft and White Finish
The 2020 Suzuki DF150A 150HP Outboard Motor is advertised with a 25-inch X shaft and white finish.
This configuration may suit boats designed for a 25-inch outboard mounting height. Before ordering, confirm the exact shaft length, transom height, engine mounting requirements, steering setup, and boat manufacturer’s maximum horsepower rating.
The identification plate should be checked to establish the precise model variant, including whether the engine is a DF150ATXW or another DF150A configuration.
All Rigging Included
The seller states that all rigging is included with this engine.
Before purchase, request a written list of the included components. Depending on the exact package, buyers may need to confirm the control box, throttle and shift cables, wiring harness, steering equipment, gauges, propeller, mounting hardware, and other installation components.
Do not assume every item is included merely from the phrase “all rigging.” The final invoice should clearly identify the supplied accessories and any exclusions.
300-Hour Service Completed
The seller reports that the 300-hour service has recently been completed and that the engine has no known issues.
This is useful maintenance information, but the service history should be documented. Request an itemized service invoice identifying the work completed, parts replaced, fluids used, and any recommendations made by the servicing technician.
Before completing the purchase, consider arranging an independent marine inspection, verifying engine hours, checking diagnostic information where available, and conducting an appropriate operational test.
Electric Start and Power Trim and Tilt
The Suzuki DF150A features electric starting and power trim and tilt.
Electric starting provides convenient engine startup, while power trim and tilt allows the operator to adjust the engine’s position for changing operating conditions, launching, and storage.
Follow Suzuki’s operating and maintenance instructions and confirm that the supplied controls are compatible with the engine.
44-Amp Charging System
The DF150A features a 12V, 44-amp alternator.
This charging system supports the starting battery and compatible onboard electrical equipment. Actual charging performance depends on engine speed, battery condition, electrical demand, and vessel wiring.
Ideal Applications
The Suzuki DF150A may suit compatible fishing boats, center consoles, bay boats, aluminum boats, and other recreational vessels designed for a 150HP outboard and a 25-inch shaft.
Always verify the vessel manufacturer’s maximum horsepower rating, transom requirements, engine weight limits, steering system, and control compatibility before installation.
Shipping & Availability
Contact Norman Outboards to confirm current availability, the exact model and serial number, the components included in the rigging package, the 300-hour service documentation, shipping rates, and delivery estimates.
Worldwide shipping may be available depending on the destination and carrier requirements. Freight, taxes, inspection, preparation, and other services may incur additional charges. Confirm the final order details and shipping arrangements before payment.
The 2020 Suzuki DF150A 150HP Outboard Motor combines 150HP four-stroke power, a white finish, a 25-inch shaft, approximately 300 engine hours, recently completed service according to the seller, and advertised complete rigging.
Reviews
There are no reviews yet.